Click to enlarge |
UP TO 16 TUNERS
SWM16 Multiswitch and Power Supply. RECOMMENDED.
DIRECTV-approved Green Label. For use with a 5LNB or 3LNB
Slimline DIRECTV dish. Powers up to 16 tuners (up to 8 HD
DVRs or 16 HD receivers, or a combination) and, with multi-room
viewing, all connected receivers can be accessed. See
SWM16 wiring diagrams.
See below for splitters and other parts.
NOW $279.99
- FREE GROUND SHIPPING
|
Click to enlarge |
UP TO 16 TUNERS
Two (2) SWM8 Package - Includes two SWM8 Units, SWM
E2 Expander & Power Supply!
A dual-SWM kit will power up to 16 tuners, and you can add
additional SWMs (using a different chassis) for future expansion.
See wiring
diagram. See below for splitters
and other parts.
NOW $399.99
- FREE GROUND SHIPPING
|
|
UP TO 32 TUNERS
Four (4) SWM8 Package Save $66! - INCLUDES FOUR SWM8
Units, SWM E4 Expander & 2 Power Supplies!
Need to power 17-32 tuners? A quad-SWM kit is your solution!
Powers up to 32 tuners (up to 16 HD DVRs or 32 HD receivers,
or a combination). See below for splitters
and other parts.
NOW $699.99
- FREE GROUND SHIPPING
|
|
| SINGLE-WIRE MULTISWITCH
Chassis / Multi-SWM Boxes (without actual SWM8 units) |
|
Six-SWM Chassis WITH 3 Power Supplies!
LIMITED TIME $230 PRICE DROP!
Holds up to six SWM units, and mounts as one unit. Internally
splits the 4 KaKu leads to each unit. Requires three power supplies
to power six SWMs (with redundant power). DIRECTV
FMC-6 Specifications and Additional Information
$555.00 NOW
$325 - FREE GROUND SHIPPING |
OUT OF STOCK. SUBSTITUTE SWM16s (above)
AND
E4 CHASSIS (below) |
|
2 Port SWM Expander E2 +
Power Supply
Holds two SWM units (SWM8 and/or SWM16), and mounts as one unit.
Internally splits the 4 KaKu leads to each SWM.
$199.99
- FREE GROUND SHIPPING |
|
|
4 Port SWM Expander E4 + (2) Power Supplies
Holds up to four SWM units (SWM8 and/or SWM16), and mounts as
one unit. Internally splits the 4 KaKu leads to each unit.
$249.99 - FREE GROUND SHIPPING |
|
| SINGLE-WIRE MULTISWITCH
Amplifiers, Polarity Lockers and Taps |
|
SWM Inline Amplifier with Power Supply
Installs after SWM (between SWM and receiver) to extend permissible
distances. Passes 2MHz signal, as required by DIRECTV. Compensates
for slope and loss. SWM
wiring diagram with Inline Amplifier
$54.99 - FREE GROUND SHIPPING |
|
|
DIRECTV Polarity Locker with Power
Supply
Locks LNBs from a DIRECTV dish (and up to two additional dishes).
Ideal in situations in which a SWM (or SWM chassis or other
DIRECTV multiswitch) is a long distance from the dish. Installs
between SWM and dish.
$179.99
- FREE GROUND SHIPPING |
|
|
DIRECTV Adjustable Amplifier with
LEDs and Power Supply
Installs between polarity locker and SWM (or SWM chassis or
other DIRECTV multiswitch) and boosts the signal to the SWM.
$249.99 - FREE
GROUND SHIPPING |
|
|
DIRECTV Satellite Tap and Power Supply
Enables four lines from a satellite dish or backbone to feed
a SWM (or SWM chassis or other DIRECTV multiswitch). Use multiple
taps to feed multiple switches.
$149.99
- FREE GROUND SHIPPING |
|
